2008 chevy cobalt cruise control fuse location

Fuse Box Diagrams

All automotive fuse box diagrams in one place

Chevrolet Cobalt (2005-2010) fuses and relays

Ad vertisements

In this article, we consider the first-generation Chevrolet Cobalt, produced from 2004 to 2010. Here you will find fuse box diagrams of Chevrolet Cobalt 2005, 2006, 2007, 2008, 2009 and 2010 , get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay.

Fuse Layout Chevrolet Cobalt 2005-2010

Cigar lighter (power outlet) fuse in the Chevrolet Cobalt is located in the Engine Compartment fuse box (see fuse “OUTLET” or “LTR”).

Table of Contents

Passenger Compartment Fuse Box

Fuse box location.

Fuse box diagram

Engine Compartment Fuse Box

Fuse box diagram (Type 1)

Fuse box diagram (Type 2)

Learn more:

Fuse Box Diagrams Chevrolet Cobalt (2005-2010)

Page Contents:

In this article, you will find information about the fuses of the Chevrolet Cobalt (models 2006, 2007, 2008, 2009, and 2010), including diagrams of the fuse boxes, a list of fuses and relays, their designation, and the location of the fuse blocks within the vehicle.

Checking and Replacing Fuses in Chevy Cobalt

The wiring circuits in the vehicle are protected from short circuits by a combination of fuses, circuit breakers and fusible thermal links. This greatly reduces the chance of damage caused by electrical problems. Look at the silver-colored band inside the fuse. If the band is broken or melted, replace the fuse. Be sure you replace a bad fuse with a new one of the identical size and rating.

There are two fuse blocks in the vehicle: the floor console fuse block and the engine compartment fuse block. There is one additional fuse located in the back of the vehicle near the battery.

Fuses and circuit breakers are marked with their ampere rating. Do not exceed the specified amperage rating when replacing fuses and circuit breakers. Use of an oversized fuse or circuit breaker can result in a vehicle fire.

Location of Fuse Boxes

Fuse Box Diagrams

Floor console fuse block.

Engine Compartment Fuse Block

Chevrolet Cobalt (2005 – 2010) – fuse box diagram

Year of production: 2005, 2006, 2007, 2008, 2009, 2010

Passenger Compartment Fuse Box

The floor console fuse block is located on the passenger side of the floor console behind the forward panel. The panel has three clips. Pull the panel to disconnect the three clips, and access the fuses.

Engine Compartment Fuse Box

WARNING: Terminal and harness assignments for individual connectors will vary depending on vehicle equipment level, model, and market.

2008 Chevrolet Cobalt fuse box diagram

This Cobalt has 2 different fuse boxes:

Chevrolet Cobalt fuse box diagrams change across years, pick the right year of your vehicle: 2010 2009 2008 2007 2006 2005

Related guides

• You are here:  

Chevrolet Cobalt 2008 Fuse Box

Fuse box informations | cars.

Chevrolet Cobalt 2008 Fuse Box Info

Passenger compartment fuse box location:

The interior fuse box is located on the passenger’s side of the floor console under the instrument panel.

Engine compartment fuse box location:

Fuse Box Diagram | Layout

Passenger compartment fuse box:

Engine compartment fuse box:

• Chevrolet Cobalt

Related Vehicles

Chevrolet trailblazer 2025 fuse box, chevrolet trax 2025 fuse box, chevrolet silverado 3500 hd 2025 fuse box.

• Hyundai Tucson 2025 Fuse Box 23 September 2024
• Hyundai Kona 2025 Fuse Box 21 September 2024
• Hyundai Ioniq 6 2025 Fuse Box 17 September 2024
• Hyundai Ioniq 5 N 2025 Fuse Box 16 September 2024

Fuse Box Info

• Jeep Compass 2018 Fuse Box
• Dodge Ram 1500 2020 Fuse Box
• Jeep Grand Cherokee 2021 Fuse Box
• Dodge Ram 2500 2020 Fuse Box
• Jeep Grand Cherokee 2020 Fuse Box
• Dodge Ram 1500 2022 Fuse Box
• Dodge Ram 1500 2019 Fuse Box

• Motorcycles

Fuse box diagram

Fuses and relay Chevrolet Cobalt

For Chevrolet Cobalt 2004, 2005, 2006, 2007, 2008, 2009, 2010 model year.

Fuse box in engine compartment.

fuse box location.

The engine compartment fuse block is located on the driver side of the vehicle. Lift off the cover to check the fuses.

fuse box diagram.

Fuse box in passenger compartment Chevrolet Cobalt .

The floor console fuse block is located on the passenger side of the floor console behind the forward panel. The panel has three clips. Pull the panel to disconnect the three clips, and access the fuses. Use the fuse puller to remove fuses.

fuse box layout.

• Forum Listing
• Marketplace
• Advanced Search
• Chevy Cobalt
• Problems and Service

Cruise Control Not Working??

• Add to quote

My 2008 Cobalt LT came with factory installed cruise control. I went to use it the other day and when I pushed the button on the steering wheel to turn it on the light on it came on like it was on. BUT when I hit set nothing happened and the cruise control didn't set. I have not replaced any tail lights or done any modifications to the car. What should I check to try to figure out why it isn't working? Thanks! Shelly P.  

Turn the key to on have someone press the brake pedal or put something heavy on it if you're alone and check if your high brake light works?  

Just checked it and it is not working. NONE of my back brake lights or the back turn signals are working. Checked the fuse & relay labeled CHMSL in Engine Compartment Fuse Block and both seem fine. Also checked fuse #9 in the Floor console fuse block and it is fine. My back lights do blink when I unlock my doors, my headlights r working fine, and my front turn signal lights blink when turned on. I have no idea what else to check. If any1 has any clue what this could be or how to go about figuring out what it might be please help. Me and my kids have a trip coming up this weekend that we can't miss and have to drive my car there. Thanks!  

Can you tell me where the one in the trunk is located? I have the owners manual but can't seem to find it in there. Thank you so much for your help.  

Thank you so much for your help. I replaced all 3 bulbs in my Center High Mount Stop Lamp and the bulbs in both tail lamps/turn signals and both are working. Cruise Control is also working now!!! But I still have no back turn signals.... the front turn signals are working. Any idea what I should check next to figure out why back turn signals are not working?? Also my back hazard flashers are not working but the front ones are....  

Are you 100% sure that you put the correct tail/blinker light bulbs in?  

You need 3157 in the back. You probably don't have brake lights either except for third brake light.  

Got turn signals fixed!!! I had the right bulbs in. The back turn signal lights in my Cobalt use a 3057 and the front uses a 3157. But after checking everything again and another trip to the auto parts store I figured out that the bulbs I had bought for my tail lamps/turn signals were defective. Replaced them with a new set and all my back lights are working!! Thank you so much for all your help. I now have working back lights and cruise control..... now I can focus on trying to figure out why the service airbag light is on and the passenger side airbag is staying off... then I'd be all set LOL Again thank you and I appreciate your help!  

Check the connector under the passenger seat, sometimes a bottle can roll and catch the wires.  

Thanks Colby7 for your suggestion. Sorry took so long to reply been busy and out of town a lot lately and not had a chance to fool with it. I checked the connector under the passenger seat and it was still connected. I unplugged it and re-plugged it back in just 2 be sure and the light is still on. I had it hooked up to see what codes it was throwing and strange as it may sound my car was throwing out no codes. The guy was baffled as to why my service airbag light would be on with no codes coming up. So he went and got another tester off the shelf that was specifically for detecting codes for airbags and any other codes and still it read out no codes. I was hoping not to have to take it to the dealership since any work they do winds up being very costly but looks like I might have to.  

• ?            
• 30K members

Top Contributors this Month

• Chevrolet Manuals
• 2008 Cobalt
• User manual

Chevrolet 2008 Cobalt User Manual

• Owner's manual (402 pages)
• page of 20 Go / 20

Table of Contents

• Instrument Panel Cluster
• Vehicle Symbols
• Driver Information Center
• Remote Keyless Entry
• Automatic Door Locks
• Theft-Deterrent System
• Passenger Airbag Status
• Child Restraints (LATCH)
• Emergency Trunk Release
• Shoulder Belt Height Adjustment
• Tilt Steering Wheel
• Easy Entry Seat
• Climate Controls
• Preventing Window Fogging
• Heated Seats
• Audio System Features
• Multiple-Disc CD Player
• Audio Steering Wheel Controls
• Satellite Radio
• Remote Vehicle Start
• Exterior Lamps
• Interior Lamps
• Cruise Control
• Retained Accessory Power
• Split-Folding Rear Seatbacks
• Parking Brake
• Electric Power Steering
• Traction Control
• Parking Your Vehicle
• Battery Location
• Tire Pressure Monitor
• Securing the Fuel Cap
• Resetting the Oil Life System

Advertisement

Quick Links

• 1 Instrument Panel Cluster
• Download this manual

Related Manuals for Chevrolet 2008 Cobalt

Summary of Contents for Chevrolet 2008 Cobalt

Page 1: table of contents, page 2: driver information instrument panel, page 3: instrument panel cluster, page 4: vehicle symbols.

• Page 5 Vehicle Information • Automatic Vehicle Unlocking: Specific Doors Press the (Information) button to • Automatic Vehicle Unlocking: When scroll through the following vehicle Key Is Off or When Shift To Park information: (Automatic Transmission Only) • Trip A • Exterior Perimeter Lighting During •...

Page 6: Safety & Security

Page 7: automatic door locks, page 8: emergency trunk release, page 9: tilt steering wheel, page 10: preventing window fogging.

• Page 11 (Seek/Scan): Press the right or Note: Choosing to engage in extended left arrow button to go to the next or searching for specific audio stations or previous radio station or, when a CD is songs by using buttons and knobs — playing, to the next track or MP3 file, or giving extended attention to enter- or to the start of the current track or...
• Page 12 Getting to Know Your Cobalt To store favorite stations: 3. Press the Clock button again to set the currently displayed time. 1. Tune in the desired radio station. To set the time (with date display, 2. Press the FAV button to display the if equipped): page where the station is to be stored.

Page 13: Multiple-Disc Cd Player

Page 14: satellite radio, page 15: exterior lamps, page 16: cruise control, page 17: cupholders, page 18: traction control, page 19: tire pressure monitor, page 20: owner information roadside assistance, rename the bookmark, delete bookmark, delete from my manuals, upload manual.

Replace a Fuse: 2008 Chevrolet Cobalt LT 2.2L 4 Cyl. Coupe (2 Door)

Chevrolet cobalt model years - 2005, 2006, 2007, 2008, 2009, 2010.

Find the 2008 Cobalt engine compartment fuse block

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

The burnt out tail light: classic reason for a cop to pull you over - change yours now

Carmakers are hiding interior fuse boxes all over the place these days - see how to check your interior fuses here!

On many cars, the high beam bulb runs at reduced power during the day - check 'em and change 'em!

Did you know that heat is worse for your battery than cold? Replace it every 4 years

• Lake Ford helped make these videos
• Download Chevrolet owners manuals

If your convenience lights, turn signals, seat warmers, stereo, headlights or other electronic components suddenly stop working, chances are you have a fuse that has blown out. The video above shows how to check and change blown fuses in the engine bay of your 2008 Chevrolet Cobalt in addition to where the fuse box diagram is located. Fuses should always be the first thing you check if your Cobalt is experiencing electrical difficulties because they are relatively easy and inexpensive to change yourself. The more electronics your Cobalt has, the more fuses it has. Some Chevrolets have multiple fuse boxes in the engine bay, so be sure to find the fuse(s) in question. Some components may have multiple fuses, so make sure you check all of the fuses that are linked to the component that is no longer working properly. If you need to replace a blown fuse in your Cobalt, make sure you replace it with one that has the same amperage as the blown fuse. If checking and replacing the fuse for the component in question doesn't work, we recommend seeking assistance from a trusted professional mechanic. They should be able to figure out if the component needs to be replaced or if there is a short or some other problem with your Cobalt.

• Advance Auto coupon for 20% off entire order: KIOSK20

Talk to our module specialists

888-241-8133

Fast Delivery Guaranteed!

             Your Control Module Headquarters.     ** AUGUST S PECIALS** Chrysler, GM, and Ford R&R service st a rti ng at $149.00 Honda, Hyundai, Toyota, Kia & Nissan R&R service starting at $179.00

AES Modules is a Control Module Repair and Remanufacturing company. We have over 110 years of combined experience in automotive electronics and pride ourselves in being able to provide our clients with quality repair services, or Remanufactured Control Modules. Our goal is to get your vehicles back on the road quickly and running like new again. With several ASE Certified Master Techs on staff we have the right tech to help solve your control module related problems. Our Goal is Customer Satisfaction and repeat referrals. To that effect, we provide free technical assistance during the purchase process, to help identify the root cause of symptoms, and help the customer decide if repairing their module or purchasing a remanufactured module best suites their needs. We also assert our confidence in the quality of our work, by backing every module we repair or sell with a life-time warranty (1-year on diesel).

Our mantra is: “If you take care of your clients, they will take care of   you.”

AES Modules specializes in ALL segments of cars, crossovers, SUVs, light trucks, and mini vans. We repair and remanufacture Engine Control Module's (ECM), Body Control Modules (BCM), Instrument Cluster Modules (ICM), Powertrain Control Modules (PCM) & Transmission Control Modules (TCM) and more. We even do Anti-Lock Breaking Systems (ABS) and Seat Control Modules (SCM). So, feel free to call one of our automotive technicians today, to let us help you with your control module needs.

Whether you are looking for a Remanufactured control module, or to Repair your damaged module, we will be able to give you your Lowest Cost best option. Remember, not every module is going to be fixable all of the time. With our knowledge and expertise we will take any technical information pertaining to your car's problem symptoms, like Diagnostic Trobule Codes (DTC's), and let you know if it is best to send yours in for Repair or to get a Remanufactured module up front. Either way, we back our work with our life-time warranty (1-year on diesel) service, and post-sale technical assistance for free.

Visit our FAQ Section to clarify any basic doubts you have regarding our services or acronyms commonly used in the control modules industry. Feel free to call us today if you have any technical questions or need assistance in choosing the right service or module to help get your vehicle back on the road as soon as possible.

Check out the list of Supported Manufacturers for our  Module Repair Services , and also the  Module Remanufacturing Services .

Call 888-241-8133 Today

• Body Controls
• Climate Controls
• Information Displays
• Instrument Clusters
• Power Locks/Kits
• Power Roofs
• Power Seats
• Power Steering
• ABS Modules
• ABS Module Bolt Kit
• Engine Control (ECU/ECM)
• Throttle Bodies / Kits
• Transmission Control (TCM)
• ALL PRODUCTS
• Testimonials & Reviews
• Top 5 Reasons to choose us
• How This Works
• Auto Shop Discounts

FIND YOUR MODULE

• Type Select Type ATV/UTV Car/Truck Motorcycle RV
• Year Select Year
• Make Select Make
• Model Select Model

WE REBUILD AUTO ELECTRONICS.

ABS Control Module Rebuilds

Instrument Cluster Rebuilds

Climate Control Module Rebuilds

Power Accessory Module Rebuilds

Powertrain Module Rebuilds

All Products

Popular Rebuilds

We are a team of electrical engineers and technicians who remanufacture automotive electronics. When your ABS light comes on, or your temperature controls stop working we can help. If the mechanic quotes you a high replacement cost, or you just can't find the part anymore check out our website for a low cost, sustainable alternative. You can remove the part and ship it to us yourself or ask your mechanic to do it for you. Still have questions? Give us a call, we're happy to help!

Seriously into modules since 2004

From its humble beginnings in 2004 operating out of his parent’s tiny pump house, Gavin Curtis grew ModuleMaster into a leading-edge technology company specializing in the repair of automotive electronics. Today, ModuleMaster operates out of two state-of-the-art facilities in Moscow, Idaho, home of the University of Idaho.

ModuleMaster receives over 1,000 modules a month including ABS controllers, instrument clusters, climate control modules, trip computers, and the list keeps growing.

Customer Testimonials

I have used module master on 2 occasions for my 2004 Chevy Suburban. The first time for the ABS module and the second time for the instrument cluster. In both cases both were repaired and returned quickly, both worked perfectly. I recommend module master without any reservations! Mike D. / Long Beach, CA

I sent Module Masters an instrument cluster to get repaired that had an ignition off draw which was not the normal gauge problems that GM clusters have. They fixed it and rebuilt it and it is working great now. I couldn’t be happier!! They have great communication and very knowledgeable. THANKS!! Jesse K. / K-Tech Automotive

You folks have found the right blend of customer service and quality workmanship at a reasonable price. American trained craftsmen are the only way to go for us in this segment of the auto parts repair industry. ABS Automotive | San Mateo, CA

My motorcycle ABS unit quit. Bought a used one off the web, sent to Module Master, they sent it back with the note that it was in perfect working order with NO Charge. I installed it and it works! How wonderful to experience old school customer service, honesty, and integrity. I am sending the faulty one for repair today! Awesome! Wonderful! Stuart D. | Atlanta, GA

Just a short note to thank Gavin and his team at Module Masters. Just received my second front seat ECU module for my Bentley, fully restored to original operating condition. Incredibly fast service and a massive saving over new factory parts, I literally saved hundreds of dollars!! I highly recommend Module Master and will certainly use their services again for future projects. Ken W.

Get in touch with us

2006 S Main St

Moscow, Idaho 83843

Mon - Thurs, 8am - 4pm PST

(208) 892-0764

Organizations & Accreditations

• Search forums
• Advanced Ebike Forums
• Maintenance and Repairs

NCM battery problem

• Thread starter RAYMOND LAWRENCE
• Start date Jul 9, 2021

RAYMOND LAWRENCE

• Jul 9, 2021

I have a Moscow Plus, the battery will not switch on either on or off the bike, the charger shows fully charged.  

Active Member

It's dirty contacts on the battery button, I always open it up and clean it with electronics contact cleaner.  

Hi, thanks for the thought,tried it but but made no difference, also checked the fuse,that was ok  

Well-Known Member

Hmm? Could be a broken contact ´in´ the battery? You might want to talk to the seller about a return. How many kliks?  

• Jul 10, 2021

Thanks for the reply, it is a bit strange as it was working but has developed a fault whilst not being used,which is why the dirty switch contacts made sense. I removed the top of the battery and sprayed switch cleaner over the switch area and checked the fuse,which was ok. The problem is ebike battery companies just want to rebuild the battery with new cells and do not want to get involved with the control unit. I purchased the bike direct from Leon cycles with a one year warranty on the battery,which has now expired,, but it is easier to contact the Pope than them.  

RAYMOND LAWRENCE said: I removed the top of the battery and sprayed switch cleaner over the switch area Click to expand...

Hi, thanks for the reply, I did spray in all spaces around the switch including above the contacts between switch and case, but I will give it another go. Interesting metaphore by the way.  

Hi, I am using an electrical contact cleaner, the switch is not an enclosed unit as you have shown, I can get the spray behind the button onto the circuit board it operates on. I fear that it is a component failure on the pcb.  

The button on the board is a simple momentary on short. If you feel confident, short where you think the button does the contacting. Hard paper clip is preferred over wire, as the wire may dance around and touch other unintended areas.  

Sorry to here the franchise you bought from is unresponsive. the store in seattle near me has been very helpful. They are currently offering a new 13ah for $300, & 16ah for $400. Still, I think you should be entitled to a replacement free or at least a signifigant discount if the failure is in the circuit board or cell connections.  

So if I understand correctly: 1) Battery was working before, you had ended a ride and fully charged the battery but it then it stopped working 2) Battery does not power the bike 3) Pressing the on/off button on the battery does nothing. Did you try long pressing for 15-20sec? 4) No LED's on the battery at all 5) You've opened the battery and checked both fuses. There's a 15a-20a discharge fuse at the top and a 5a charge fuse at the bottom (usually). Does the USB port work? My feeling is it's the discharge fuse but you say you've checked it. I think it's time to get a multimeter (are you comfy with that sort of thing). Check the power on the discharge port at the top. Anything? If you can carefully probe the charge port (BE CAREFUL, use a 2.1mm barrel connector from an old wall wart to make a plug to use to test with) what is the voltage there? Opening the top of the battery can you trace wires back from the discharge connector to the fuse then to the BMS. Check for voltage everyone along that path you can and let us know what you find. Post some pics of the BMS and wiring at the top of the battery  

Similar threads

• Aug 30, 2024

• May 30, 2024
• Jun 2, 2024
• May 31, 2024
• Introductions & Bike Garage
• Jun 1, 2024

• We use cookies to ensure that we give you the best experience on our website. Accept Learn More…